PicoScope 7 Software
Available on Windows, Mac and Linux
Crashes crashes crashes
Crashes crashes crashes
Hi,
I am having problems with PicoScope crashing. It always crashes when I turn serial decoding on (with both uart and spi), but I also had crashes when just zooming in. I am collecting 10 digital signals for 50 seconds, so these datafiles are too big to post. I also tried saving just a snippet from it with "only save zoomed region", but then the serial decode never completes (always shows "processing"). I have also seen crashes without the serial decode, just by zooming in on one of the bigger files.
I found a smaller file that also crashes, this is attached. The serial decoders are set up but disabled. As soon as I enable any one of the decoders, the software crashes.
Some details:
PicoScope® 6 - PC Oscilloscope software version: 6.10.11.15 (same with beta 6.10.3.14)
Model: PicoScope 3204D MSO
USB Version: 3,0
Hardware Version: 1
Driver Version: 1.4.4.30
Firmware Version: 1.2.0.0 / 1.0.14.0
Windows 7-64 (same with a different computer running 8.1-64)
Capturing ~10 digital signals (SPI, Uart@115200, Uart@19200-9bit, some more)
Trigger level dropout on analog channel A
I'm hoping for a quick solution or workaround, as it is not very useful without serial decode..
Regards,
Chris
I am having problems with PicoScope crashing. It always crashes when I turn serial decoding on (with both uart and spi), but I also had crashes when just zooming in. I am collecting 10 digital signals for 50 seconds, so these datafiles are too big to post. I also tried saving just a snippet from it with "only save zoomed region", but then the serial decode never completes (always shows "processing"). I have also seen crashes without the serial decode, just by zooming in on one of the bigger files.
I found a smaller file that also crashes, this is attached. The serial decoders are set up but disabled. As soon as I enable any one of the decoders, the software crashes.
Some details:
PicoScope® 6 - PC Oscilloscope software version: 6.10.11.15 (same with beta 6.10.3.14)
Model: PicoScope 3204D MSO
USB Version: 3,0
Hardware Version: 1
Driver Version: 1.4.4.30
Firmware Version: 1.2.0.0 / 1.0.14.0
Windows 7-64 (same with a different computer running 8.1-64)
Capturing ~10 digital signals (SPI, Uart@115200, Uart@19200-9bit, some more)
Trigger level dropout on analog channel A
I'm hoping for a quick solution or workaround, as it is not very useful without serial decode..
Regards,
Chris
- Attachments
-
- test_ser2.psdata
- crashes when serial decode enabled
- (489.73 KiB) Downloaded 275 times
Re: Crashes crashes crashes
We are aware of issues with Serial Decoding and have a Beta release due out very soon. I have tested your file on a pre Beta, enabled all of the decoders you had configured, and it didn't crash.
If you are interested in testing a version as soon as it is available then please contact support@picotech.com
If you are interested in testing a version as soon as it is available then please contact support@picotech.com
Martyn
Technical Support Manager
Technical Support Manager