Pico Logger 1012 - Streaming mode

Post your LabVIEW discussions here
Post Reply
tc_magic
Newbie
Posts: 0
Joined: Thu Apr 09, 2015 9:16 am

Pico Logger 1012 - Streaming mode

Post by tc_magic »

I am using a PicoLog Data logger in streaming mode to capture 720 samples on 11 channels. (720 * 11 = 7920)

I have assumed that every second I would get 7920 samples and am using the 1 second timer for my frame time.

I have a test script which uses the 1 second timer and have found that there are some instanced where the 1 second times does not go off so the script takes longer than it should.

Should I stop relying on the pico logger to time 1 second?

I remember in the olden days that windows would turn USB devices off if it thought it wasn't using them, do you think this is the case?

AndrewA
PICO STAFF
PICO STAFF
Posts: 401
Joined: Tue Oct 21, 2014 3:07 pm

Re: Pico Logger 1012 - Streaming mode

Post by AndrewA »

Hello,
Can you attach the vi to post or email into support@picotech.com
Regards Andrew
Technical Specialist

Post Reply