PicoScope 7 Software
Available on Windows, Mac and Linux
Stored oscilloscope data to specrta
Stored oscilloscope data to specrta
Hello to all,
i'm new with the PicoScope Software, my question refers to the possibility (if there is one at all) to use the FFT (spectral view) of the PicoScope to create out of saved oscilloscope data (from the connected oscilloscope) a spectrum.
The work arround would be to store the signal values as a csv and afterwards run the fft in excel.
Thanks in advance
Hannes
i'm new with the PicoScope Software, my question refers to the possibility (if there is one at all) to use the FFT (spectral view) of the PicoScope to create out of saved oscilloscope data (from the connected oscilloscope) a spectrum.
The work arround would be to store the signal values as a csv and afterwards run the fft in excel.
Thanks in advance
Hannes
Re: Stored oscilloscope data to specrta
Hello Hannes,
Yes you can, open a psdata file (scope view capture)
To add a spectrum ‘view’-
Right click anywhere in the waveform view buffer, choose ‘add view’ -> ‘Spectrum’
You may need to use the zoom tool, in the new spectrum view.
Regards Andrew
Technical Specialist
Yes you can, open a psdata file (scope view capture)
To add a spectrum ‘view’-
Right click anywhere in the waveform view buffer, choose ‘add view’ -> ‘Spectrum’
You may need to use the zoom tool, in the new spectrum view.
Regards Andrew
Technical Specialist
Regards Andrew
Technical Specialist
Technical Specialist