several traces on the screen

Post any questions about our parallel port products
Post Reply
arielmedina
Active User
Active User
Posts: 17
Joined: Thu Nov 11, 2004 2:40 pm

several traces on the screen

Post by arielmedina »

I am using an ADC 212/50 and I would to know how can I paste or recover several traces on the scope screen to make a comparisson among those.
I can do it using graph in Excel. But this way is a too much complicated.
Have you another way?
Thanks.

Ariel

Sarah

Post by Sarah »

Hi

Thank you for your post.

Once you have captured a trace, go to View | Freeze\Thaw One. This will freeze the trace. Then open a new scope view and start recording - the other trace should remain frozen. This should help you achieve your aim.

Hope this helps

Best Regards

Guest

Post by Guest »

Thank you for your reply.

Ok. Now I can to remain frozen the first trace and capture a new one. But I want to see both traces, the old and new one on the same background, because the different beetwen them are very small.
Could the scope capture on the screen which is in FREEZE mode?

I will appreciate your assistance.

Best Regards

Ariel

Sarah

Post by Sarah »

Hi

Thank you for your post.

Can I assume from your message to me that you have sorted this now?

Best Regards

jarvissamuel
User
User
Posts: 2
Joined: Wed May 18, 2005 5:11 am
Location: Denver Colorado

Post by jarvissamuel »

If the two images are in saved files the file merge feature could be used for observing the the difference between the two (if 212-50 has this ability)

Post Reply