TC-08 USB

iam using 2 no of TC-08 USB loger for TUS (Temperature uniformity), i required 15 inputs and i conected 15 thermocouple with 2 no of TC-08 USB.

15 data (reading) i can see in the PLW recorder, but in view spreadsheet i can able to see only 12 reading.
what is the problem and how i can get 15 datas from 2 no of TC-08 USB.

Hi senthilkumar,

What version of PicoLog are you using?

I tested with two TC-08s using PicoLog and I am able to see 15 channels in the spread sheet view.

Would you be able send a PLW file with this issue to support@picotech.com?
So I can have a look at the the settings you are using.

Kind Regards,

Thanks for your reply,

actually i have made mistake in spreadsheet setting (select parameter), here i have selected only 12 points.

now i have selected 15 points and working good,

once again thanks for your support

Hi

I recently purchased 10 TC-08 USB boards and today if the frist time we have used them.

I have conencted 44 thermocouples to 6 devices.
I have changes the input to monitor all 44
I have renamed 32 channels to T1-T32 and this has been saved

But when I run the test I can only see 15 records on the spreadsheet and 18 records are displayed on the graph, how do i get all 44 to record and display.

Dave

Hi Dave,

The PicoLog software limits the number of channels that can be displayed at one time. However, the data will still be logged to file.

The workaround for this is to group channels in the Graph and Spreadsheet views and then select which group you wish to view.

Please see the latter part of section 9 of the PicoLog Self-Help Guide (https://www.picotech.com/legacy-document/pdf/picolog-self-help-guide-1.pdf) for further information.

If you need to view all the traces during capture, you will have to consider running separate instances of the software with no more than two TC-08 devices controlled by each one.

Regards,