Which One Is The Right One???

Which product is right for your exact requirements
Post Reply
tazelikechickn
Newbie
Posts: 0
Joined: Thu Nov 14, 2013 5:30 am

Which One Is The Right One???

Post by tazelikechickn »

Hey Guys,

I work for an education institute and am looking for a Pico Oscilloscope. At the previous campus that I worked at, I had an excellent Pico set up. Unfortunately, money is a factor and so I am looking for a 2 channel scope with all the automotive software included, probably with a 50MHz sample rate. (just a thought)

Does anyone know if the automotive package is included with all the scopes? I know that I used to be able to update the software on the old one I used.

I have looked at some that are available and the 4000 series seems to fit the bill. I am looking at spending about $1,000 - 1,500 AUD, but would be grateful to spend less.

Any thoughts?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Which One Is The Right One???

Post by Martyn »

You will need to be looking at 4225 as the current Automotive Scope, you may be able to acquire a 4223 from a distributor as these have only just been replaced by the current model, or a 3223 second hand.

These are the only two channel scopes that will work with the automotive software, all other models are for Test and Measurement use only.

For more advice please visit our Automotive Forum at http://www.picoauto.com/support/ and our Automotive Website http://www.picoauto.com/index.html
Martyn
Technical Support Manager

tazelikechickn
Newbie
Posts: 0
Joined: Thu Nov 14, 2013 5:30 am

Re: Which One Is The Right One???

Post by tazelikechickn »

Hey Martyn,

Thanks for the advice, I will follow it up thru a distributor.

Post Reply