10 V range in ADC212/100

Which product is right for your exact requirements
Post Reply
E.Muthu Kumar
User
User
Posts: 3
Joined: Thu Jul 29, 2004 11:26 am

10 V range in ADC212/100

Post by E.Muthu Kumar »

Hi,
I am using 3 units of adc212/100 for my application. What I have noticed in the 10 V range is when I apply a pulse of faster rise time like 1 micro second in the negative polarity, channel B is not responding properly . Where as for a positive polarity it is responding correctly for the same settings. All the 3 units are behaving in the same manner. I believe that this is a hardware problem. I have sent the waveforms to Pico technical support and awaiting reply. Will you be able to check 10 V range of channel B for Negative polarity for a faster rise time pulse for some other ADC 212/100 unit in your factory and give a feed back? If required I will send the recorded waveforms by e-mail.
Thank you
Best regards
E. Muthu Kumar.

Sarah

Post by Sarah »

Hi

Thank you for your post.

My colleague Seb is currently looking at the file you sent and will be in contact with you via email soon.

Best Regards

Post Reply