pico TC08

Having problems ? let us know the details here
Post Reply
jacciona
Newbie
Posts: 0
Joined: Wed Oct 01, 2014 4:09 pm

pico TC08

Post by jacciona »

Hi,

I am using a pico TC-08 data loggger but I am finding strange temperature readings.... especially when I am combining two types of K thermocouples. One is the standdard K thermocouple (Type K Thermocouple (Exposed wire, fibreglass insulated)
Tip Diameter: 1.5 mm) and the second one is a also K type and insulated but thinner...tip diameter 0.5mm.

Main problem is that during the measurement all temperature readings of all thermocouples suddenly goes up few degrees.... and few minutes after goes down ....

any idea???


thanks

jacciona
Newbie
Posts: 0
Joined: Wed Oct 01, 2014 4:09 pm

Re: pico TC08

Post by jacciona »

Thanks for your response, unpluging the laptop power to the mains and runing it off the battery solve the problem....



nice to have a good support service!!!!!


javier

Callum
PICO STAFF
PICO STAFF
Posts: 3
Joined: Tue Sep 02, 2014 10:45 am

Re: pico TC08

Post by Callum »

Hi Jacciona,

Glad i was able to help with your issue through help desk.
Callum

Technical Specialist

Post Reply