PicoScope 6.9.14.16 crashes on serial decoding selection

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
fritzpas
Newbie
Posts: 0
Joined: Wed Sep 10, 2014 1:29 pm

PicoScope 6.9.14.16 crashes on serial decoding selection

Post by fritzpas »

Startup Settings --> Reset Startup Settings
2. Restart PicoScope Application
3. Select my digital channels (D0-D7) to be TTL at 1.5V
4. Create group and rename it from G1 to for e. g. SPI
5. Drag & Trop D2, D3, D4 and D5 to this group
6. Optinal rename the the added channels to MOSI, MISO, SCLK and SCSn
7. Press the "Apply"-Button
8. Switch off all both analog channels
9. Go to Tools --> Serial Decoding
10. Select D2 (MOSI) and set the protocol to SPI
NOW the application show short the possible settings for SPI and the it CRASHES
Menu.Tools.Click
Serial Decoding Button Click
Unregistered () ToolStripMenuItem.Click
Unregistered () Combo.SelectedIndex=10
Exception caught in Threadpool Task 'CBE ReqData'
Unhandled Exception:System.NullReferenceException: Object reference not set to an instance of an object.
at tT.TransformSingle(oH result)
at oq.a(oH )
at oq.<>c__DisplayClass7.b__4(oH result)
at aV.<>c__DisplayClasse.a.a(Object )
at eG.<>c__DisplayClass1.b__0(Object state1)

Using Embedded Resource: Pico.Automotive.Waveforms.VehicleDetails.ECUDatabase.xml Custom Data Path: C:\Dokumente und Einstellungen\fri087\Lokale Einstellungen\Anwendungsdaten\Pico Technology\CustomECUMake.xml Downloaded Data Path: C:\Dokumente und Einstellungen\fri087\Lokale Einstellungen\Anwendungsdaten\Pico Technology\DownloadedECUMake.xml
Trace Closing

Remember that I can reproduse this action since a few versions ago. And I can also not select another serial protocol like I2C or SPI (custom).

OK so I try another way. I load the settings from a previous serial decoding session.
The View updates and I see the channles and the triggers. But If the Picoscope receives some data to decode
the application crashes again.

What I'am doing wrong? Have testet it unter Windows 7 64-Bit and Windows XP 32-Bit.
Same crash at both Systems. The PicoScope is directly connected to an USB-Port.

Can anybody help me?

Kind regards
Pascal


PicoScope® 6 - PC Oscilloscope software version: 6.9.14.16
Copyright © 1995-2014, Pico Technology Ltd

Model: PicoScope 3206MSO
Serial Number: CW002/052
USB Version: 2,0
Calibration Date: Freitag, 11. Januar 2013
Hardware Version: 1
Driver Version: 1.4.1.30
Firmware Version: 1.3.3.0 / 0.6.12.0
-->
Hey,

since I updated to the new PicoScope release version 6.9.14.16 the software crashes allways.

What I do, and I can reproduce this crash everytime:
1. File --> Startup Settings --> Reset Startup Settings
2. Restart PicoScope Application
3. Select my digital channels (D0-D7) to be TTL at 1.5V
4. Create group and rename it from G1 to for e. g. SPI
5. Drag & Trop D2, D3, D4 and D5 to this group
6. Optinal rename the the added channels to MOSI, MISO, SCLK and SCSn
7. Press the "Apply"-Button
8. Switch off all both analog channels
9. Go to Tools --> Serial Decoding
10. Select D2 (MOSI) and set the protocol to SPI
NOW the application show short the possible settings for SPI and the it CRASHES
Menu.Tools.Click
Serial Decoding Button Click
Unregistered () ToolStripMenuItem.Click
Unregistered () Combo.SelectedIndex=10
Exception caught in Threadpool Task 'CBE ReqData'
Unhandled Exception:System.NullReferenceException: Object reference not set to an instance of an object.
at tT.TransformSingle(oH result)
at oq.a(oH )
at oq.<>c__DisplayClass7.b__4(oH result)
at aV.<>c__DisplayClasse.a.a(Object )
at eG.<>c__DisplayClass1.b__0(Object state1)

Using Embedded Resource: Pico.Automotive.Waveforms.VehicleDetails.ECUDatabase.xml Custom Data Path: C:\Dokumente und Einstellungen\fri087\Lokale Einstellungen\Anwendungsdaten\Pico Technology\CustomECUMake.xml Downloaded Data Path: C:\Dokumente und Einstellungen\fri087\Lokale Einstellungen\Anwendungsdaten\Pico Technology\DownloadedECUMake.xml
Trace Closing

Remember that I can reproduse this action since a few versions ago. And I can also not select another serial protocol like I2C or SPI (custom).

OK so I try another way. I load the settings from a previous serial decoding session.
The View updates and I see the channles and the triggers. But If the Picoscope receives some data to decode
the application crashes again.

What I'am doing wrong? Have testet it unter Windows 7 64-Bit and Windows XP 32-Bit.
Same crash at both Systems. The PicoScope is directly connected to an USB-Port.

Can anybody help me?

Kind regards
Pascal


PicoScope® 6 - PC Oscilloscope software version: 6.9.14.16
Copyright © 1995-2014, Pico Technology Ltd

Model: PicoScope 3206MSO
Serial Number: CW002/052
USB Version: 2,0
Calibration Date: Freitag, 11. Januar 2013
Hardware Version: 1
Driver Version: 1.4.1.30
Firmware Version: 1.3.3.0 / 0.6.12.0
Attachments
SPI_WIZ550io.pssettings
(4.69 KiB) Downloaded 322 times
Report_2014_09_10.zip
(3.08 KiB) Downloaded 237 times