I am using the AWG feature and find the waveform doesn't update is a change is only made on the 2nd half of the cycle.
Settings 50Hz 2V no offset Squarewave. AWG = 1024 samples and 1 cycle
If I make a change the the first half of the waveform and press apply I can see the waveform update immediately. However if I make a change only to the second half of the waveform the waveform doesn't update when I press apply.
Also: It would be great to be able to trigger from the AWG directly. I am trying to recreate spikes in data using the AWG and it is difficult to trigger from the resulting waveform.
I'm creating a sinewave input with noise spikes on it. I would like to trigger on the same point on the AWG output, but this is difficult because of the spikes. I was wondering if it is possible to trigger the scope from the start (or any point) of the AWG?
I keep changing the waveform. It's a sinewave with a spike somewhere along it's length. I was wondering if it would be possible to trigger on a certain part of the AWG output. For example: if the AWG is 1024 long, trigger at an arbitrary sample of, say, 300.