Picoscope 3205 - No B Channel Trace

Post any questions you may have about our current range of oscilloscopes
Post Reply
phog
Newbie
Posts: 0
Joined: Thu Jul 10, 2014 4:17 pm

Picoscope 3205 - No B Channel Trace

Post by phog »

Hello,

I've just dug out our Picoscope 3205 to use and I'm finding I can't get the second channel to work. I've tried the latest (R6.9.12) and the previous available (R6.6.57) version of the software (on XP) and the problem seems the same in both.

Once I enable the second channel I don't see a trace (I have the input connected to gnd with a 50ohm terminator) - what I do get is an exclaimation mark near the axis. The A channel seems fine.

Any ideas - am I just missing a setting somewhere.

cheers!
Paul

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope 3205 - No B Channel Trace

Post by Martyn »

Please contact support@picotech.com as it sounds like a faulty channel.
Martyn
Technical Support Manager

Post Reply