How to create MSO group

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
NikB
Newbie
Posts: 0
Joined: Tue Jun 24, 2014 2:30 pm

How to create MSO group

Post by NikB »

When I create a digital channel/group no signals appear to be included, as the value stays at zero, but if I add the individual channels to the display, I can see them changing. I tried selecting channels from the upper window and from the lower (Display) window with same result. Any suggestions what I'm missing?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: How to create MSO group

Post by Martyn »

Try dragging and dropping the digital channels onto the group name, you should then get a little plus sign to the left of the group name.
Martyn
Technical Support Manager

NikB
Newbie
Posts: 0
Joined: Tue Jun 24, 2014 2:30 pm

Re: How to create MSO group

Post by NikB »

Martyn wrote:Try dragging and dropping the digital channels onto the group name, you should then get a little plus sign to the left of the group name.
That worked, thanks!

Post Reply