I have a Drdaq datalogger connected to the parallel port of my laptop. I have two temperature sensors. When I start recording I just get a consant temperature of 68 degrees (F). from both sensors. If I grab a sensor in my fist, I expect to see the temperature increase.
I would suggest trying the unit on another computer and seeing if this changes things. Also try swapping the sensors round and if possible try some other sensors.
I will try device on another computers. How sensative are the sensors? By the way, the reason I brought the device was so my son could do the global warming experiment. In the global warming experiment you have on the web site how did you get carbon Dioxide into the bottle?
To answer your question. The sound sensor seems to work fine. When I clap my hands near the device I see a spike on the graph. This worked on the original computer I was testing on.
I have another thought. I downloaded the latest software. I first uninstalled the original software I installed from the CD then I install the updated Picolog software. Next, I downloaded and installed the driver software. These were the files I download and installed.
I tried the device on another PC with the same results. I have two temperature sensors. I tried both of them separately. I did get a little temperature variation, but it was eratic, reading 70.1 to 70.9 (F); not a large variation though.
Thank you for your posts, I am sorry to hear that none of this has helps.
It sounds like either the unit or the sensors are faulty. I would recommend contacting the distributer from whom you purchased them and ask for an exchange for a new DrDAQ and sensors.
I cannot immediately think of anything else that could be causing the problem.
If you wish to test the sensors further you could try putting them in ice water and also in boiling water to see what they register.