event counter

Eastern · Post by **Eastern** » Fri Jan 07, 2005 7:37 pm

Hi,

Is there any way I could use the Picoscope 3206 for recording the number of times it triggered on an event and the duration of the event?

Thanks,
Dave

Sarah · Post by **Sarah** » Mon Jan 10, 2005 11:21 am

Hi

Thank you for your post.

You could set a "Repeat Trigger" and set it to save on trigger. This way every time a trigger event occured it would save a file showing that, you would then know how many times it had happened by how many files were saved. As for the length of the event, you will see the length as long as it does not exceed the length of the window of the trigger.

Hope this helps

Best Regards

Guest · Post by **Guest** » Mon Jan 10, 2005 2:52 pm

Thank you for this information. It helps, but I was hoping I could get just a readout of an event histogram.

Thanks,
Dave

Sarah · Post by **Sarah** » Tue Jan 11, 2005 10:13 am

Hi

Thank you for your post.

The closest you could get to doing that would be to record constantly and then print a graph after.

Best Regards