Test and Measurement Forum

Graph and record trigger question

Forum for discussing PicoLog

Graph and record trigger question

Postby rmtab » Sun Jan 26, 2014 9:28 am


I run a TC-08 USB and PicoLog.

First question:

How do I change the grid resolution in the graphs? It is impossible to see a difference in 10deg. when there is 100deg between the grid lines.. Major grid lines by 50deg. and minor grid lines by 10deg. had been great.

Last question:

Is it possible to trig a record start by something else than the mouse record press button? Had been great if the record started automaticly by 200deg. or something...

Thank you!

/Chris, Roslagens Motorteknik AB, Norrtälje, Sweden.
Posts: 0
Joined: Sat Jan 25, 2014 12:05 pm

Re: Graph and record trigger question

Postby Martyn » Tue Feb 04, 2014 2:23 pm

You can zoom in and move around the graph using the arrow buttons and magnifying glass buttons ion the right and top of the graph display.

Unfortunately it is not possible to start recording at a given temperature using Picolog. If you were to use the SDK you could write your own application to do this.
Technical Support Manager
Site Admin
Site Admin
Posts: 2853
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to PicoLog

Who is online

Users browsing this forum: No registered users and 0 guests