PicoScope 7 Software
Available on Windows, Mac and Linux
Page size on printing
Page size on printing
How do I change the page size for printing to A3 instead of A4?
I changed from A4 to A3 in the printer setting for the printer but it didn't scale the output to match the new paper size.
/hakan
I changed from A4 to A3 in the printer setting for the printer but it didn't scale the output to match the new paper size.
/hakan
-
Hitesh
Re: Page size on printing
Hi Hakan,
Please check your printer settings - there should be an option to automatically scale to the paper size in your printer properties.
Hope this helps.
Please check your printer settings - there should be an option to automatically scale to the paper size in your printer properties.
Hope this helps.
Re: Page size on printing
Just scaling the paper from A4 to A3 doesn't help much if no more data is added to the print out by picoscope 6. Compare that to the situation when you zoom in on the screen to see a waveform better, picoscope adds more and more data from the waveform memory to display the spot you want to look at with best possible resolution. If you just zoom without adding data the waveforms will be more and more "pixelated"
The same should be done when moving from A4 to A3, more data should be added from the waveform memory to display the best possible waveform.
The suggested solution to scale in the printer driver will not add any data to the waveform which means that it is quite useless.
/hakan
The same should be done when moving from A4 to A3, more data should be added from the waveform memory to display the best possible waveform.
The suggested solution to scale in the printer driver will not add any data to the waveform which means that it is quite useless.
/hakan
-
Hitesh
Re: Page size on printing
Hi Hakan,
Thank you for your reply.
I will put forward your comments as a new feature request.
Thanks,
Thank you for your reply.
I will put forward your comments as a new feature request.
Thanks,