Graph and record trigger question

Forum for discussing PicoLog
Post Reply
rmtab
Newbie
Posts: 0
Joined: Sat Jan 25, 2014 12:05 pm

Graph and record trigger question

Post by rmtab »

Hi!

I run a TC-08 USB and PicoLog.

First question:

How do I change the grid resolution in the graphs? It is impossible to see a difference in 10deg. when there is 100deg between the grid lines.. Major grid lines by 50deg. and minor grid lines by 10deg. had been great.


Last question:

Is it possible to trig a record start by something else than the mouse record press button? Had been great if the record started automaticly by 200deg. or something...


Thank you!

/Chris, Roslagens Motorteknik AB, Norrtälje, Sweden.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Graph and record trigger question

Post by Martyn »

You can zoom in and move around the graph using the arrow buttons and magnifying glass buttons ion the right and top of the graph display.

Unfortunately it is not possible to start recording at a given temperature using Picolog. If you were to use the SDK you could write your own application to do this.
Martyn
Technical Support Manager

Post Reply