PicoScope 7 Software
Available on Windows, Mac and Linux
User of Picoscope4223-14 problems with Duty cycle messuremen
User of Picoscope4223-14 problems with Duty cycle messuremen
- This is the measurement that I have made.
I have problems taking measurements with the function Duty Cycle with our new PicoScope. The problem is that it is a signal taken of a coil wich produce an induction. It is a automotive signal of the EVAP. I think it take the Duty Cycle time of the induction peak and not the time of the actuation and deactuation of the signal. Can you help me with this?
Re: User of Picoscope4223-14 problems with Duty cycle messur
Try Tools->MathsChannels and enable Invert A, and then perform the duty cycle calculation on this, it will be inverted so needs subtracting from 100 to give the value you require.
A bit of a work around, but I will submit a request to the team to add a threshold level to perform duty cycle calculations on.
A bit of a work around, but I will submit a request to the team to add a threshold level to perform duty cycle calculations on.
Martyn
Technical Support Manager
Technical Support Manager
Re: User of Picoscope4223-14 problems with Duty cycle messur
Hello Martin,
I will try this later on. thanks for your supply.
have a good weekend,
Adriaan
I will try this later on. thanks for your supply.
have a good weekend,
Adriaan