TC-08 linux driver

Post any questions about our serial port products
Post Reply
dom54
Newbie
Posts: 0
Joined: Tue Dec 03, 2013 10:35 am

TC-08 linux driver

Post by dom54 »

Hi,

I use a serial TC-08 under linux. The driver TC08lnx works just fine and "talks" through shared memory with a dedicated C code. Nevertheless, the driver can't be used to modify resolution and filter factor. I'm also interested in reading the cold junction temperature.

Is it possible to send me a copy of the tc08lnx.c (that is briefly evoked in the readme file of the tc08.tar archive) ? It would allow me to tweak it a little to achieve my goal !

Best regards

Dominique

Martyn
Site Admin
Site Admin
Posts: 4483
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: TC-08 linux driver

Post by Martyn »

Have you checked http://www.picotech.com/support/topic106.html#p267 which will explain about resolution and cold junction. Filtering can be handled in your software.
Martyn
Technical Support Manager

Post Reply