Dual Triggering

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
dreaquil
Newbie
Posts: 0
Joined: Thu Nov 21, 2013 1:23 pm

Dual Triggering

Post by dreaquil »

I don't know if this makes any sense but is it possible to set two triggers for different channels ( 1 for A and 1 for B) if they are being displayed in different scopes (or not)?

Hitesh

Re: Dual Triggering

Post by Hitesh »

Hi dreaquil,

You can only set one trigger at a time on a device. It is possible to trigger on a combination such as A OR B as well as A AND B.

Regards,

dreaquil
Newbie
Posts: 0
Joined: Thu Nov 21, 2013 1:23 pm

Re: Dual Triggering

Post by dreaquil »

How would I do that please?

Hitesh

Re: Dual Triggering

Post by Hitesh »

Hi dreaquil,

Ensuring that the channels that you require are enabled, please click on the Advanced Triggers icon on the toolbar and select the Logic Trigger option:
Logic Trigger dialog
Logic Trigger dialog
You can configure the parameters for the channels and select the combination. Please ensure that the 'Used' tickbox is selected.

I hope this helps.

Post Reply