Hello everybody,
When I try to install the drdaq library happen:
root@raspberrypi:/drdaq# sudo dpkg -i libusbpico_1.0-1_{i386|armel}.deb
bash: armel}.deb: command not found
dpkg: error processing libusbpico_1.0-1_{i386 (--install):
cannot access archive: No such file or directory
Errors were encountered while processing:
libusbpico_1.0-1_{i386
Thank you Martyn, but... the answer is:
root@raspberrypi:/drdaq# sudo dpkg -i libusbpico_1.0-1_armel.deb
dpkg: error processing libusbpico_1.0-1_armel.deb (--install):
package architecture (armel) does not match system (armhf)
Errors were encountered while processing:
libusbpico_1.0-1_armel.deb
Thanks Martyn,
Which kind of image I have to fill in ? Raspbian is not ok because armhf.
Scuse me if I insist, but I would like to prepare one PH meter with raspberry pi for an exibition.
It was the wheezy armel image that we built the drivers for. Not sure if there is still a download for this on the pi site. I will have a look what we have when I am back in the office.
Thank you, I have to find an old image, than I can prepare my sample.
But, as soon as possible should be necessary to re compile the library for the image available in the web. The first that will do it should share it here (If I'll do it I'll share it).
Thanks for all
Alessandro