Picoscope meter, minimum frequency

Forum for discussing PicoScope (version 5)
Post Reply
Tresco
User
User
Posts: 5
Joined: Thu Nov 18, 2004 2:15 am
Location: Australia

Picoscope meter, minimum frequency

Post by Tresco »

what is the minimum frequency that can be measured on the AC Meter and Freq Meter?

Mine seems to drop-out below 50Hz (ADC-42)

I'd like to be able measure down to 0.5 Hz - could this be considered for future software updates?

thanks...

Sarah

Post by Sarah »

Hi

Thank you for your post

The best way to measure lower frequencies is to use Picolog and increase the scan time. This should enable you to see lower frequencies.

Hope this helps

Best Regards

Tresco
User
User
Posts: 5
Joined: Thu Nov 18, 2004 2:15 am
Location: Australia

AC Voltmeter in picoscope

Post by Tresco »

could you please advise what is the minimum frequency that the AC Voltmeter will measure (in picoscope)

Sarah

Post by Sarah »

Hi

Thank you for your post.

I am unable to give an exact figure as to the minimum value. However you will find the measurement function on the trace view to be a better measuring tool.

Hope this helps

Best Regards

Post Reply