Rapid triggering number of events incomplete and storage

Post any questions you may have about our current range of oscilloscopes
Post Reply
lenkoop
Newbie
Posts: 0
Joined: Thu Feb 14, 2013 7:47 pm

Rapid triggering number of events incomplete and storage

Post by lenkoop »

Is there a method for storing data from an incomplete number of events when using rapid trigger mode on a 6404B? If you set the number to 20 events and get less, may you still store and view what is in the buffer? This is not an issue in repeat trigger mode.
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Rapid triggering number of events incomplete and storage

Post by Martyn »

There is currently no method to retrieve data from the scope during a rapid block run, interaction between the scope and the driver is kept to a minimum to enable the fastest possible re-arming of the trigger between buffers.
Martyn
Technical Support Manager
Top
MikeT56
Newbie
Posts: 0
Joined: Thu Sep 05, 2013 3:12 pm

Re: Rapid triggering number of events incomplete and storage

Post by MikeT56 »

If you force the scope to stop acquisition during a rapid sequence, can you download the data from the events that have been stored up to that point?
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Rapid triggering number of events incomplete and storage

Post by Martyn »

Unfortunately not in the present driver implementation.
Martyn
Technical Support Manager
Top
Post Reply

Return to “USB PC Oscilloscopes”