ADC-200/20

Post any questions about our parallel port products
Post Reply
yotabyte
Newbie
Posts: 0
Joined: Mon Sep 09, 2013 10:03 pm

ADC-200/20

Post by yotabyte »

I'm unable to use my ADC-200/20. When I try to run the program, it says that I don't have it connected.

I'm using 64-bit Windows 7 and have tryed everything I can think of. Is it even possable to get it to work is 64-bit Windows 7?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: ADC-200/20

Post by Martyn »

The ADC200/20 will not work on a 64bit O/S. This applies to all of our parallel port products. Sorry.
Martyn
Technical Support Manager

yotabyte
Newbie
Posts: 0
Joined: Mon Sep 09, 2013 10:03 pm

Re: ADC-200/20

Post by yotabyte »

Will it work if I get an USB adaptor and use it on a laptop?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: ADC-200/20

Post by Martyn »

No it will only operate on a 32bit system.

From experience we have also found that USB to parallel port adaptors do not work on systems with a 32bit O/S, they are generally designed only for printers.
Martyn
Technical Support Manager

Post Reply