ADC-100

Which product is right for your exact requirements
Post Reply
Herb6702
User
User
Posts: 2
Joined: Thu Nov 11, 2004 8:14 am

ADC-100

Post by Herb6702 »

What is the mode for the printer port (i.e. ECP?),
Does the scope come with probes?

Sarah

Post by Sarah »

Hi

Thank you for your post.

The recommended modes for the printer port are:

SPP, Output Only, Unidirectional, Normal

The modes ECP, EPP and Bidirectional are not recommended.

The ADC-100 unit is not supplied with probes however these can be bought seperately from us.

Hope this helps

Best Regards

Herb6702
User
User
Posts: 2
Joined: Thu Nov 11, 2004 8:14 am

ADC-100

Post by Herb6702 »

Thank you for your response. Your recommended mode of SPP, Output Only, Unidirectional confuses me a bit. If the mode for the printer is o=Output Only, then how is informaion sent from the ADC-100 to the computer. Also, Can you recommend a laptop that will interface on its printer port to the ADC-100. We currently use Toshiba Satellite and Dell Latitude notebooks with WindowsXP.

Thank You

Sarah

Post by Sarah »

Hi

Thank you for your post.

As strange as the name does seem, and as much as it does imply that data only travels in one direction, I would assure you Output Only does work better than the other modes (ECP, EPP etc).

Unfortunately I am unable to recommend a laptop for you to use with your ADC-100 unit.

Hope this helps

Best Regards

Post Reply