Rise time measurement

Forum for discussing PicoScope (version 5)
Post Reply
benmar
Newbie
Posts: 1
Joined: Wed Nov 10, 2004 3:19 pm

Rise time measurement

Post by benmar »

Picoscope is measuring rise time between 20% and 80% of the signal amplitude.

Is it possible to measure rise time between 10% and 90% of the signal amplitude? And how to setup picoscope software to measure it.

Sarah

Post by Sarah »

Hi

Thank you for your post.

Unfortunately there is not a way to change how the risetime is measured and therefore you would not be able to measure it between 10 and 90%.

Hope this helps

Best Regards

Post Reply