64 Bit Drivers in the SDK's

Post general discussions on using our drivers to write your own software here
Post Reply
Martyn
Site Admin
Site Admin
Posts: 3374
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

64 Bit Drivers in the SDK's

Post by Martyn » Fri Mar 08, 2013 8:42 am

You will now find 64 bit drivers for our current products in the SDK's

You will need version R10.5.0.1, or later, which can be downloaded from http://www.picotech.com/software.html
Martyn
Technical Support Manager

toneyal
Newbie
Posts: 0
Joined: Fri Jan 20, 2012 8:28 am

Re: 64 Bit Drivers in the SDK's

Post by toneyal » Wed Jun 26, 2013 9:51 pm

I have an ADC-212 and I have to move it to a different computer since the last one died. This one is a eMachines with windodws 7. I can't get the scope software to work.

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: 64 Bit Drivers in the SDK's

Post by Hitesh » Mon Jul 01, 2013 10:57 am

Hi toneyal,

The ADC-212 is a parallel port device and is therefore not supported on 64-bit operating systems. Please use a 32-bit operating system.

Regards,
Hitesh

Technical Support Engineer

Post Reply