what do i need

Which product is right for your exact requirements
Post Reply
JOANNE
User
User
Posts: 2
Joined: Tue Oct 26, 2004 1:37 pm

what do i need

Post by JOANNE »

I am looking for the software and adapter to plug into my laptop and a pressure transducer to chart pressure. It needs to be accurate and tke many points as I am trying to determine which piston is bad on a hydraulic piston pump. Which product would you recommend?
Joanne

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

Thank you for your post.

I would recommend that you consider the ADC-212/3. This unit has two channels and multiple voltage ranges. It can be used in Picoscope or Picolog to look at fast events.

Unfortunately, we are do not sell pressure sensor, but you could try:

rswww.com
www.farnell.com

Best regards,
Regards,

Mark Spencer

JOANNE
User
User
Posts: 2
Joined: Tue Oct 26, 2004 1:37 pm

Post by JOANNE »

The pressure transducer is not a problem but I have a few questions about the ADC-212/3. Does it come with the adapter to plug the transducer into or is it just the software. Do I require any other parts? Where can I find information on this on the website?
Joanne

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

Thank you for your email.

The ADC-212/3 does not come with any connectors for connecting the transducer or any other sensor to it. It does come with a power adapter, parallel cable for connecting it to your PC and the software.

All the details about the ADC-212/3 can be found at:

http://www.picotech.com/digital_oscilloscope.html

Best regards,
Regards,

Mark Spencer

Post Reply