high sampling rate

Forum for discussing PicoScope version 6 (non-automotive version)
Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: high sampling rate

Post by Hitesh » Tue Apr 16, 2013 3:56 pm

Hi Bassem,

Are you able to upload the psdata file to a file share site such as DropBox and send a link to support@picotech.com?

Thanks,
Hitesh

Technical Support Engineer

baffoun
Newbie
Posts: 0
Joined: Wed Mar 27, 2013 5:39 pm

Re: high sampling rate

Post by baffoun » Wed Apr 17, 2013 12:13 pm

Hi Hitesh,

i made a data sample with 100MSamples. The .psdata file is 84MB big. So if you can reactivate my guest account at your PicoStore, i will upload the file there !

Bassem

baffoun
Newbie
Posts: 0
Joined: Wed Mar 27, 2013 5:39 pm

Re: high sampling rate

Post by baffoun » Wed Apr 17, 2013 1:14 pm

Thank you, i have uploaded the file.

Bassem

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: high sampling rate

Post by Hitesh » Thu Apr 18, 2013 1:15 pm

Thanks Bassem,

I have e-mailed you from our Helpdesk as this requires further investigation.

Regards,
Hitesh

Technical Support Engineer

st514
Newbie
Posts: 0
Joined: Wed Oct 15, 2014 11:28 am

Re: high sampling rate

Post by st514 » Tue Aug 29, 2017 1:53 pm

Has a solution for this issue been found? I am getting the same errors in Matlab with files over 100MS.

Many thanks,
Sam

Hitesh
Site Admin
Site Admin
Posts: 2845
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: high sampling rate

Post by Hitesh » Wed Aug 30, 2017 8:52 am

Hi Sam,

Please e-mail support@picotech.com and we can look to provide you with a workaround.

Regards,
Hitesh

Technical Support Engineer

Post Reply