TA032 Inductive Pickup Attenuation

Post any questions you may have about our current range of oscilloscopes
Post Reply
Krankshaft
Newbie
Posts: 0
Joined: Thu Mar 28, 2013 9:00 pm

TA032 Inductive Pickup Attenuation

Post by Krankshaft »

Does anyone happen to know what the attenuation factor of the TA032 inductive pickup is? Is it 10,000:1 like the capacitive PP178 pickup?

I take it the attenuation on the TA032 is achieved by the number of wire turns on the iron core? I intend to use it on my Pico 2204 for its synchronization pulse to identify cylinder number one during relative compression tests and want to know if I would need an attenuator?

Thanks for the input.
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: TA032 Inductive Pickup Attenuation

Post by Martyn »

It generates a voltage that will be within the input range of the scope so you will not need attenuators for it.
Martyn
Technical Support Manager
Top
Post Reply

Return to “USB PC Oscilloscopes”