433Mhz RF

Which product is right for your exact requirements
Post Reply
Tim Pilcher

433Mhz RF

Post by Tim Pilcher »

Can you tell me if you have a scope that is capable of sampling a 433Mhz RF Wave. If you do which ADC scope do i need.

Regards

TIM :?:

User avatar
matthew
Advanced User
Advanced User
Posts: 109
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK

Post by matthew »

Hi Tim,

Unfortunately, our maximum analogue bandwidth is 50MHz.

Best Regards,
Matt Everett

Pico Software Engineer

Guest

re :RF 433Mhz

Post by Guest »

Thanks for that info. But do you know where or what I need to sample the 433Mhz.


Thanks again

TIM

User avatar
matthew
Advanced User
Advanced User
Posts: 109
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK

Post by matthew »

Hi Tim,

You'll need to source a 433+ MHz scope from another supplier. If you type 'oscilloscopes' into a search engine, I'm sure you will find a suitable scope.

www.rswww.com will probably have something suitable.

Best Regards,
Matt Everett

Pico Software Engineer

ghast

rf+433mhz+4channels

Post by ghast »

i need al the possile info over rf 433mhz 4channels;can somebody lihk me or give me a hand

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

Unfortunately, we do not have a product that can measure 433MHz our highest bandwidth product is 100MHz. You could try radio spares or farnell to see what thay have available.

Best regards,
Regards,

Mark Spencer

Post Reply