PicoScope 7 Software
Available on Windows, Mac and Linux
6403B sampling rate
6403B sampling rate
Hi all,
I just buy a 6403B PicoScope (for my job)
I bought because of its high deep memory.
but i don't understand. :
with a 100ms/div time base :
With one channel activated the sampling announced (by picoscope 6) is 156MS/s
With 2 channels, it is down to 78.13MS/s.
It does not fulfill the memory of 512MS.
If i use 1 channels the sampling is 156Ms/s for 100ms/div and 78.13MS/s for 200ms/div.
I precise that the buffer size is set to 512MS and i set the buffer controls to 2.
CAn someone help me ?
Thank you
I just buy a 6403B PicoScope (for my job)
I bought because of its high deep memory.
but i don't understand. :
with a 100ms/div time base :
With one channel activated the sampling announced (by picoscope 6) is 156MS/s
With 2 channels, it is down to 78.13MS/s.
It does not fulfill the memory of 512MS.
If i use 1 channels the sampling is 156Ms/s for 100ms/div and 78.13MS/s for 200ms/div.
I precise that the buffer size is set to 512MS and i set the buffer controls to 2.
CAn someone help me ?
Thank you
Re: 6403B sampling rate
To use the full memory you have to use a single trigger within Picoscope. When using repeat, auto or none for the trigger the memory is split to provide buffering of data on the scope.
Martyn
Technical Support Manager
Technical Support Manager