[SOLVED]Saved waveform does not contain the digital data

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

[SOLVED]Saved waveform does not contain the digital data

Post by blachanc »

PicoScope® 6 - PC Oscilloscope software version: 6.6.50.3
Model: PicoScope 3206MSO

Saved waveform does not contain the digital data:

When I save all waveform, the digital data does not seem to be saved:
Attachments
saved_waveform_reloaded
saved_waveform_reloaded
capture results
capture results
Last edited by blachanc on Wed Dec 11, 2013 12:53 pm, edited 1 time in total.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Saved waveform does not contain the digital data

Post by Martyn »

Can you post the psdata file here so that we can take a look
Martyn
Technical Support Manager

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: Saved waveform does not contain the digital data

Post by blachanc »

Hi Martyn,

Thank you for your support.

Unfortunately, the files that show the behavior are more than a Meg in size...


so I get The file is too big, maximum allowed size is 512 KiB. when I try to load them.

So, I placed them on filedropper:


http://www.filedropper.com/formartyn

So far the only wavefiles not showing the digital when I reload are more than a meg...
While playing around to create samples for you, I noticed that if I zoom enough, the digital data will appear (forMartyn3_BAD.psdata)


Please refer to the included picture:
Attachments
files.jpg

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Saved waveform does not contain the digital data

Post by Martyn »

Thank you for the files, I have seen the same effect with the release version of the software 6.6.50 the data reappears at around x1.3 zoom. This issue is not present with the beta version of the software 6.6.15 which will become the main stream release in the near future.
Martyn
Technical Support Manager

blachanc
Newbie
Posts: 1
Joined: Fri Feb 01, 2013 2:49 pm

Re: Saved waveform does not contain the digital data

Post by blachanc »

blachanc wrote:Hi Martyn,
While playing around to create samples for you, I noticed that if I zoom enough, the digital data will appear (forMartyn3_BAD.psdata)
Please refer to the included picture:

Martyn wrote:Thank you for the files, I have seen the same effect with the release version of the software 6.6.50 the data reappears at around x1.3 zoom. This issue is not present with the beta version of the software 6.6.15 which will become the main stream release in the near future.
thank you Martyn,

at least we have a work around until the new release,
so the issues is not as important as I initially thought.

regards,
Benoit

Post Reply