Test and Measurement Forum

sampling and reproducing a stream

Which product is right for your exact requirements

sampling and reproducing a stream

Postby robs » Sun Dec 30, 2012 5:30 pm


I need to sample an audio signal noise (about 1-100Khz), store it and then reproduce it when I want.

Can picoscope do that ?

Thank you,
Roberto Sebastiano
Posts: 0
Joined: Sun Dec 30, 2012 5:21 pm

Re: sampling and reproducing a stream

Postby Hitesh » Tue Jan 01, 2013 12:27 pm

Hi Roberto,

You can capture signals using a PicoScope device. If it has an Arbitrary Waveform Generator, then you can output the stored signal but it will depend on the device as to the number of samples that make up the waveform.

What is the time period of the signal and how many samples would you be looking to capture? What is the voltage range of the signal?

You may wish to look at the following models:

PicoScope 2206/7/8: http://www.picotech.com/picoscope2200-specifications.html

PicoScope 3000 (B and MSO variants): http://www.picotech.com/picoscope-specifications.html

PicoScope 4262: http://www.picotech.com/picoscope4262-specifications.html

I hope this helps.

Technical Support Engineer
Site Admin
Site Admin
Posts: 2748
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to Pre-Sales Advice

Who is online

Users browsing this forum: Bing [Bot] and 0 guests