Maths Channels

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
harrogate22
Newbie
Posts: 0
Joined: Fri Aug 31, 2012 10:40 am

Maths Channels

Post by harrogate22 »

Hi

I am unable to use the Maths Channels. Please, what am I doing wrong?

I 'm running PicoScope 6 with a PicoScope 2204. I have two traces running on channels A and B, and when I try a simple Maths Channel (eg A*B), then click on "OK", all that appears on the screen are the two channels A and B, as before, with no sign of an additional maths channel.

The operation seems so straight forward, yet it fails to work. Any help would be most gratefully received.

Ken

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Maths Channels

Post by Martyn »

Can you try with the latest release candidate version of our software 6.6.46 from http://www.picotech.com/software.html
Martyn
Technical Support Manager

harrogate22
Newbie
Posts: 0
Joined: Fri Aug 31, 2012 10:40 am

Re: Maths Channels

Post by harrogate22 »

Thanks very much Martyn; that worked fine.

Post Reply