ADC-20 offset error

Post any questions you may have about our current range of USB data loggers
Post Reply
Boris
Newbie
Posts: 0
Joined: Fri Jul 27, 2012 7:44 am

ADC-20 offset error

Post by Boris »

Hello,
I connect all voltage inputs together with analogue ground to measure the zero point (Pico ADC-20 data logger). When I use range +/- 1250 mV the raedings are : ch1 0.010-0.007 mV, ch2 0.000-0.005 mV and etc. to ch8. When the range is +/-2500 mV, the values are around the -2 mV ( ch1 -1.874 mV, ch2 -2.050 mV , ch3... ).
Is it a normal situation ?

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ADC-20 offset error

Post by ziko »

Hi thank you for your post, I realise you sent an email on support@picotech.com I will carry on answering this on the helpdesk.


Regards
Ziko

Technical Specialist

Post Reply