Use AWG of P6403 in a single line not continuous mode

Post any questions you may have about our current range of oscilloscopes
Post Reply
ffortino
User
User
Posts: 8
Joined: Wed Jan 16, 2008 4:17 pm

Use AWG of P6403 in a single line not continuous mode

Post by ffortino »

Hi,

I'm using your P6403 (which is a really great product) and I want to use the built in AWG sig gen, in a one shot mode, not continuous. Is it possible to configure the AWG to output just 1 waveform with a long delay before the next one?
Thanks

Hitesh

Re: Use AWG of P6403 in a single line not continuous mode

Post by Hitesh »

Hi,

This should be possible using the Software Development Kit - a trigger is required to output shots. To accomodate the delay you can use a timed input signal or a software trigger with delays between the calls to the trigger function. Some investigations have been carried out in relation to this so please do check back for an update.

It is not possible to output shots with PicoScope at this time.

Hope this helps.

Post Reply