Software for auto printout after logging complete.

Post general discussions on using our drivers to write your own software here
Post Reply
paddy123
Newbie
Posts: 0
Joined: Thu Jun 14, 2012 5:47 pm

Software for auto printout after logging complete.

Post by paddy123 »

Hi,

I presently use an ADC-24 for general data logging purposes.
I now have a need to data log on a machine using about 7 sensors which will preferably be wired
differentially.The logging will start via a digital input and will last about 5 minutes with sampling
at about 10/sec on all but one channel which needs to be at 100/sec.Logging will stop when
a second digital input is triggered.
When the stop signal is detected I will also need to automatically print out a graph of just two of the
channels over the logging period.
What software Pico or third party would allow me to do this( with the minimum of effort!) ?
I am happy to use a different Pico unit if necessary.

Thanks

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Software for auto printout after logging complete.

Post by Martyn »

Can you please send this request to support@picotech.com
Martyn
Technical Support Manager

Post Reply