TC-08 LED Flashing

Post any questions you may have about our current range of USB data loggers
Post Reply
dustinsanchez
Newbie
Posts: 1
Joined: Thu Jun 11, 2009 5:28 pm
Location: Manassas, VA

TC-08 LED Flashing

Post by dustinsanchez »

This is the first time I have used my TC-08 logger and I believe I have the set up correct. I observed that the LED continually flashes red, green, red, green.......
I have been told this is normal. Does anyone know why this happens and if it indicates incorrect settings. I am measuring temperature on 6 of the 8 available channels.
Thanks in advance.
Dustin

Robin
Advanced User
Advanced User
Posts: 558
Joined: Fri Sep 19, 2008 10:17 am

Post by Robin »

Hi

Yes, this is normal. The LED goes red when the unit is opened and green when data is being transferred.

Robin

ElvisUnknow
Newbie
Posts: 0
Joined: Thu May 24, 2012 7:55 am

Re: TC-08 LED Flashing

Post by ElvisUnknow »

I have been using the PL1216 for a few weeks now, and now when I plug it in, the LED starts blinking and doesn't stop.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: TC-08 LED Flashing

Post by Martyn »

Does it still work with the software ?
Martyn
Technical Support Manager

Post Reply