PicoScope 7 Software
Available on Windows, Mac and Linux
Spectrum scale seems to show 2x f
Spectrum scale seems to show 2x f
I have just started using the 2206 and upgraded to the latest software.
I was using the spectrum mode to check a phone line dial tone. The two frequencies detected were twice what I expected.
As a test I set the generator to 1KHz and the sweep to 5Khz and fed it to CHA. Again the scale showed a 2KHz main peak (and slight peak at 4KHz).
Changing to scope mode showed the frequency was indeed 1KHz as expected.
What am I doing wrong ?
G
I was using the spectrum mode to check a phone line dial tone. The two frequencies detected were twice what I expected.
As a test I set the generator to 1KHz and the sweep to 5Khz and fed it to CHA. Again the scale showed a 2KHz main peak (and slight peak at 4KHz).
Changing to scope mode showed the frequency was indeed 1KHz as expected.
What am I doing wrong ?
G
Re: Spectrum scale seems to show 2x f
This has been fixed in the R6.6.28(RC) version which you can download from the usual links
Martyn
Technical Support Manager
Technical Support Manager