Triggering in Labview\ adc200_set_trigger

Post general discussions on using our drivers to write your own software here
Post Reply
eeniu@hotmail.com

Triggering in Labview\ adc200_set_trigger

Post by eeniu@hotmail.com »

I am making a user interface through labview to take measurements of the signal coming from the pico. I used the example interface you provide, but it does not have a set trigger library in the example. Is there anyone that has accomplished this and if not is there anyone that knows the correct approch.

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

After a few requests from other companies I have created a vi that does have triggering incorporated. If you send an email to:

tech@pictech.com

request adc200t.zip

Best regards,
Regards,

Mark Spencer

Post Reply