current clamp

Post any questions you may have about our current range of oscilloscopes
Post Reply
risting
Newbie
Posts: 0
Joined: Mon Feb 06, 2012 4:43 pm

current clamp

Post by risting »

Have just bought a 2207 scope with a TA018 current clamp.
On page one of the two-page mini-manual shipping with the current clamp it says that you will see a list of available probes after selecting the correct channel button and choosing probe control.
That list never shows. I am using software version 6.6.16.12
Anyone?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: current clamp

Post by Martyn »

If you click on the channel letter with the diagonal arrow and then select the drop down combo box next to the word "Probe" you will see the probes currently available in Picoscope. If this does not include Current Clamps then please go to "Tools->CustomProbes" menu and import the attached probe definition files.
Attachments
60A Current Clamp.zip
(1.45 KiB) Downloaded 478 times
Martyn
Technical Support Manager

Post Reply