2104 Problem

Post any questions you may have about our current range of oscilloscopes
Post Reply
cypis
Newbie
Posts: 0
Joined: Wed Feb 01, 2012 2:44 pm

2104 Problem

Post by cypis »

Hi,
I have a problem with PicoScope 2104th When connected to a PC that looks like everything works, but I can not measure anything. Is it weird that if you short the probe tip to ground terminal line shows an oscilloscope-20mV instead of 0V. If I measure the voltage at 1.5 V battery in one direction is the measured voltage 1.6 V in the other direction 0.09 V. If you connect an oscilloscope to another computer, everything is fine.
Thank you for your answer.

Hitesh

Re: 2104 Problem

Post by Hitesh »

Hi cypis,

Which version of PicoScope are you running on your PC and which OS are you using?

Regards,

Post Reply