Recording stops at sampling interval over 100 ms

Post any questions you may have about our current range of USB data loggers
Post Reply
pengberg
Newbie
Posts: 0
Joined: Thu Nov 24, 2011 1:59 pm

Recording stops at sampling interval over 100 ms

Post by pengberg »

When using a sampling interval of more than 100 ms, the value recorded becomes a constant. As soon as the recording is stopped, the values again vary normally. It doesn't matter if the sampling interval is entered as 1000 ms or 1 second, neither will record the real values, only a constant value over and over again.
My setup:
ADC-11 (USB)
PLW recorder 5.22.1 running on a virtual XP on a windows 7 64-bit.
regards

Per Engberg

Hitesh

Re: Recording stops at sampling interval over 100 ms

Post by Hitesh »

Hi Mr. Engberg,

I've been able to replicate the issue using PicoLog 5.22.1 on a Windows 7 32-bit system.

Please try installing PicoLog 5.16.2 which can be downloaded from http://www.picotech.com/software.html

I've tested it and it works at 1000ms intervals.

I hope this helps.

pengberg
Newbie
Posts: 0
Joined: Thu Nov 24, 2011 1:59 pm

Re: Recording stops at sampling interval over 100 ms

Post by pengberg »

Thank you for your reply, I've just tested it and it seems to work OK.

Post Reply