PicoScope 7 Software
Available on Windows, Mac and Linux
Logging battery time, bug report
Logging battery time, bug report
Hi
When the sweep time is set to more than 500s, the scope does not work.
Verifying the buy is easy: Set sweep time to 1000s, number of samples to 1k (or 10k it does not matter). Start a sweep and wait. Nothing happens.
Reduce sweep time to 500s, and the scope works again.
I would like to use PicoScope6 (version: 6.5.80.5) and 5403 to measure battery voltage over time.
I have estimated that my battery will be drained in 15 hours.
Please advise how I can measure this.
Best Regards,
Ion
When the sweep time is set to more than 500s, the scope does not work.
Verifying the buy is easy: Set sweep time to 1000s, number of samples to 1k (or 10k it does not matter). Start a sweep and wait. Nothing happens.
Reduce sweep time to 500s, and the scope works again.
I would like to use PicoScope6 (version: 6.5.80.5) and 5403 to measure battery voltage over time.
I have estimated that my battery will be drained in 15 hours.
Please advise how I can measure this.
Best Regards,
Ion
Re: Logging battery time, bug report
Ion,
I have tested that on a R6.5.80.5 and it works for me.
There may be something specific in your setup that is causing the issue so can I ask that you contact our team at support@picotech.com, giving further details on your setup, and they will work through this with you.
Kind regards,
I have tested that on a R6.5.80.5 and it works for me.
There may be something specific in your setup that is causing the issue so can I ask that you contact our team at support@picotech.com, giving further details on your setup, and they will work through this with you.
Kind regards,
Martyn
Technical Support Manager
Technical Support Manager