Time-delay issue with <=200us/dev

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
cvon
Newbie
Posts: 0
Joined: Fri Aug 26, 2011 12:58 pm

Time-delay issue with <=200us/dev

Post by cvon »

Hi,

first I would like to thank Pico for fixing the issue with the Time-Delay which I reported a month ago !! In principle it's working great now.
I however found the next problem with this feature.

My scenario:
- Recording pulses of 2ms lenght
- Pulses coming ever 34ms

Problem:
- When I record with no Time-Delay I can see the pulse with 500us/dev, with 200us/dev and so on
- When I set the Time-Delay to 34ms I can see the next puls when I set the time to 500us/dev. I however can't see the next puls as soon as I set the time to 200us/dev or below.

I first thought that the puls was out of the window but this is definitely not the case.

The problem only occurs if I activate the Time-Delay. As soon as I deactivate the Time-Delay I can see the puls with any time/dev setting.

I hope that you can find a solution for this.

Best regards
Christian

cvon
Newbie
Posts: 0
Joined: Fri Aug 26, 2011 12:58 pm

Re: Time-delay issue with <=200us/dev

Post by cvon »

Here some information which I forgot.
PicoScope Hardware: 2205
PicoScope Software: 6.6.4.5 (Beta)

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Time-delay issue with <=200us/dev

Post by Martyn »

Christian,
Thank you for reporting your issue which I have been able to recreate here. I have submitted a report to the development team and will advise you when I have an update.
Martyn
Technical Support Manager

Post Reply