Test and Measurement Forum

Generate frequency using DrDaq AWG

Post any questions about our serial port products

Generate frequency using DrDaq AWG

Postby ababar » Wed Aug 24, 2011 8:02 pm


Can any one help me out and tell me what is the min freq step that can be generated using DrDAQ AWG. i.e i want generate 49.5 to 50Hz. For example 49.5Hz then 49.55, then 50Hz, 50.5 Hz and then 50.55Hz. Is it possible using DrDaq.

Best Regards
Posts: 0
Joined: Wed Aug 24, 2011 7:54 pm

Re: Generate frequency using DrDaq AWG

Postby Martyn » Thu Aug 25, 2011 1:28 pm

No, the minimum frequency step for DrDaq is 1Hz.

To achieve the resolution you require you would need to look at the 22xx range of oscilloscopes http://www.picotech.com/picoscope2000.html
Technical Support Manager
Site Admin
Site Admin
Posts: 3110
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to Serial Port Products

Who is online

Users browsing this forum: No registered users and 0 guests