Trigger for each data point

Post any questions you may have about our current range of oscilloscopes
Post Reply
GregH

Trigger for each data point

Post by GregH »

Hello,

I am looking to do some order (harmonic) analysis on an electric motor that has an encoder.

To do this analysis, we need to log data from the torque sensor on each encoder pulse.

Previosly we have done this using a National Instruments data acquisition card and Labivew. I was wondering if it was possible to set up the external trigger on a picoscope to acquire data in this way.

All of the information I have about triggering on the picoscope seems to relate to triggering a screen or a batch of data rather than triggering every data point.

Thanks

Greg Heins

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Trigger for each data point

Post by Martyn »

Please take a look at our guide for advanced triggering http://www.picotech.com/education/oscil ... ering.html, the functionality is available in the Picoscope software and through the programming interface.

If you need further clarification then please contact our technical team at support@picotech.com and they will be able to assist you.

Kind regards,
Martyn
Technical Support Manager

Post Reply