ENVIROMON

Which product is right for your exact requirements
Post Reply
jazavac
Newbie
Posts: 1
Joined: Mon Mar 16, 2009 11:22 am

ENVIROMON

Post by jazavac »

Hi

For solar power plant we have to measure humidity and we would also like to measure rain fall. We are planning to use EnviroMon for measuring Humidity, but we can not find appropriate rain fall sensor. Is it possible to suggest some sensor which Picotech work with?
Thanks and regards,
JJ

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: ENVIROMON

Post by ziko »

HI unfortunately we have not used rainfall sensors, the only thing I can say is that if you have a sensor that has a voltage or current output proportional to rainfall then you can combine this with the EL037 general purpose voltage/current convertor. It has 4 inputs each can be adjusted to accept 4-20mA or +/-2.5V or +/-10V. You would then use a scaling file to adjust the readings accordingly.

http://www.picotech.com/e_converters.html#el037

Hope this helps.
Ziko

Technical Specialist

Post Reply