multiple triggers

Forum for discussing PicoScope (version 5)
Post Reply
Haydn
Newbie
Posts: 0
Joined: Wed Dec 15, 2010 4:17 pm

multiple triggers

Post by Haydn »

Hi, I'm using an ADC200/50 with picoscope R5.21.2

I am unable to set more than one trigger.

I would like set picoscope to trigger at +200mv and at -200mv.

is this possible?

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: multiple triggers

Post by ziko »

Hi unfortunately you can only do simple triggering with the ADC212. Not sure if this is what you are looking for but we have advanced triggering for most of our USB scopes:

http://www.picotech.com/education/oscil ... ering.html

Kind regards
Ziko

Technical Specialist

Haydn
Newbie
Posts: 0
Joined: Wed Dec 15, 2010 4:17 pm

Re: multiple triggers

Post by Haydn »

Thanks for the reply.
Am I right in thinking I would need to purchase a 3000 series picoscope to have this feture in picoscope 6 software.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: multiple triggers

Post by ziko »

Well it depends really on what you want to do exactly. There are window triggers where you can have 2 voltage levels so a signal can trigger when it enters or leaves a window.

Can you describe the signal you are trying to trigger on?

Kind regards
Ziko

Technical Specialist

Post Reply